Liberty Pumps® ELV-280 Cast Iron 1-Phase Submersible Elevator Sump Pump with Oil Sensor, 65 gpm, 0.5 hp, 3450 rpm

Sump Pumps
204300 MFG #: ELV-280
2794.00000 / ea

  • Amperage Rating: 8.5 A Full Load
  • Bearing Material: Stainless Steel
  • Connection Type: NPT
  • Enclosure: NEMA 1
  • Flow Rate: 65 gpm
  • Frequency Rating: 60 Hz
  • Height: 13 in
  • Housing Material: Cast Iron
  • HP Rating: 0.5 hp
  • Impeller Material: Engineered Polymer
  • Item Name: Elevator Sump Pump with Oil Sensor
  • Length: 18 in
  • Manufacturer: Liberty Pumps®
  • Maximum Head: 37 ft
  • Mounting: Easy Clamp
  • Phase: 1
  • RPM Rating: 3450 rpm
  • Series/Model: Series ELV
  • Shaft Material: Stainless Steel
  • Size: 1-1/2 in Discharge
  • Switch Type: Float Operated Mechanical
  • Temperature Rating: 140 deg F, 248 deg F Thermal Overload
  • Type: Submersible
  • Voltage Rating: 115 V

The ELV series sump pumps are designed and approved for safe operation of pumping, alarming and monitoring of elevator sump pits, transformer vaults and other applications where oil and water must be detected. The OilTector® system will activate the pump to remove water from elevator pits in accordance with ASME A17.1 and will provide pumping of only water even if an oil condition is detected. The OilTector® cycles the pump only in the water range. Oil and other harmful floating substances are not discharged into the environment. An alarm is activated in the event of a high water condition or high oil condition.

QTY
  • Features
  • Oil resistant SJEOOW cord
  • Easy, clamp mounted preset level sensor holder
  • No field adjustments required, OilTector will turn pumps on and off, sound the high water alarm and high oil alarm with one easy installation
  • Control panel with separate pump and control circuits having NEMA 1 enclosure
  • Plug-in ready pump cord and power to panel cord for quick and easy installation
  • Remote alarm with additional auxiliary (24 VDC) contacts for connection to building automation system or SCADA system
  • Audio/visual warning
  • Power on, pump run, high water and high oil lights
  • Standards/Approvals: ASME A17.1, CSA Certified, UL Listed
  • Applications: For elevator sumps, transformer vaults and commercial applications