Bradford White® D-100S-199-3N Vitraglas Steel Commercial Natural Gas Water Heater, 100 gal, 1-1/2 in NPT

Water Heaters
214730 MFG #: D-100S-199-3N
8138.00000 / ea

Bradford White® Commercial Flue Damper Energy Saver Gas Water Heater, 100 gal Heating, Natural Gas Fuel, 3/4 in NPT Gas Connection, 1-1/2 in NPT Water Connection, 6 in Vent, Magnesium Anode Rod Heating Element, 80% Energy Efficiency, 139 gph Recovery Rate, 150 psi, 180 deg F, Ultra Low NOx: Yes

MANUFACTURER DISCLAIMERS:

  • Bradford White manufactures products for installation by qualified professional contractors with applicable state and local licensing. Bradford White Corporation assumes no liability for products installed outside of the installation recommendations in the product’s official installation and operation instruction manual.  Bradford White only assumes responsibility for verified manufacturing defects as stated in the applicable Bradford White limited warranty for your product.

  • It is the purchaser’s responsibility to purchase products that meet state and local codes for the intended installation site of the Bradford White product.

QTY
  • Features
  • Integrated control intelligent proven design combines temperature control, diagnostic codes and system ignition functions into a single control board with a digital LCD display and control panel cover tilts down for ease of wiring and service
  • Two different digitally displayed operation modes have the capability of adjusting the temperature setting up to 180 deg F and adjusting the degree setting
  • Eight different digitally displayed service modes can be easily cycled through by pressing the select button and there is the capability of adjusting the temperature setting up to 180 deg F
  • Electronic ignition high voltage, low current electricity is sent to the pilot electrode initiating a spark to ignite the pilot gas and results in savings of pilot gas during standby periods because the pilot flame only operates when there's a call for heat
  • Automatic flue damper reduces standby loss, saving gas consumption and improving overall efficiency
  • Vitraglas lining an engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water and fused to the steel surface by firing at a temperature of over 1600 deg F
  • Non-CFC foam covers the sides and top of the tank, reducing heat loss, results in less energy consumption, improved efficiencies, and jacket rigidity and use a supplied flexible fiberglass insulation blanket
  • Water connections factory installed true dielectric fittings extend water heater life and eases installation and multiple water connection locations allow for greater installation flexibility
  • Hand hole cleanout allows inspection of tank interior and facilitates the removal of sediment deposits
  • An automatic reset Energy Cut Off (ECO) shuts off all gas in event of an overheat condition and automatically resets when operation conditions are back to normal
  • Magnesium anode rods provide added protection against corrosion for long trouble free service
  • Sanitizing capability
  • Tamper proof brass drain valve
  • Includes temperature and pressure relief valve
  • Standards/Approvals: AHRI Certified, ASHRAE 90.1b, C.E.C. Listed, CSA Certified, GAMA Certified, NSF Certified