Bell & Gossett PL Series PL-30 1BL012 Circulator Pump, 70 gpm, 115 V, 1.4 A, 60 Hz, 150 psi Max Pressure, 2650 rpm Motor

Hydronic Circulating Pumps
783298 MFG #: 1BL012
Requires Quote

Bell & Gossett PL Series PL-30 1BL012 Circulator Pump, 70 gpm, 115 V, 1.4 A, 60 Hz, 150 psi Max Pressure, 2650 rpm Motor
  • Additional Information: Glass-Filled Noryl Impeller Material
  • Amperage Rating: 1.4
  • Connection Size: 3/4 in, 1 in, 1-1/4 in, 1-1/2 in, 3/4, 1, 1-1/4, 1-1/2
  • Connection Type: NPT Flanged
  • Dimensions: 6-3/8 in H x 8-5/8 in W x 4-3/8 in D, 8-5/8 in W x 6-3/8 in H x 4-3/8 in D
  • Flow Rate: 70
  • Frequency Rating: 60
  • HP Rating: 1/12
  • Manufacturer: Bell & Gossett
  • Material: Iron
  • Maximum Head: 18
  • Maximum Pressure: 150
  • Model: PL-30
  • Motor Speed Rating: 2650
  • Mounting Type: Inline, In-Line
  • Phase: 1
  • Series: PL, PL Series
  • Temperature Rating: 225
  • Voltage Rating: 115
  • Body Material: Cast Iron
  • Impeller Material: 30% Glass-Filled Noryl
  • Speed Rating: 2650

Bell & Gossett Circulator Pump, PL Series, Model: PL-30, 70 gpm Flow Rate, 18 ft Maximum Head, 115 V, 1.4 A, 60 Hz, 150 psi Maximum Pressure, 2650 rpm Motor Speed Rating, 1/12 hp, 3/4 in, 1 in, 1-1/4 in, 1-1/2 in Connection, NPT Flanged Connection, 1 ph Phase, In-Line Mounting, 225 deg F, Iron, 6-3/8 in H x 8-5/8 in W x 4-3/8 in D, Additional Information: Glass-Filled Noryl Impeller Material

QTY
Add to Wishlist
  • Features
  • The pumps shall be of the horizontal, permanently lubricated type, specifically designed and guaranteed for quiet operation
  • The pumps shall have a steel shaft supported by permanently lubricated, sealed precision ball bearings
  • The pumps are to be equipped with a water-tight seal to prevent leakage
  • Mechanical seal faces to be carbon on silicon carbide
  • The motor shall be non-overloading at any point on the pump performance curve
  • The motor shall be of the drip-proof, sealed precision ball bearing, quiet operating construction
  • The permanent split-capacitor motor shall be equipped with thermal overload protection
  • The Series PL features a maintenance-free system, with a self-cleaning particle shield protects the shaft and bearings from system start-up debris
  • Easily handles dirty water conditions
  • 25% more efficient than competition
  • Close coupled dry motor
  • STANDARD_APPROVALS: CSA Certified|cUL Listed
  • APPLICATION: For quiet operation in hydronic, radiant and geothermal heating and cooling systems