Branch:
{{vm.headerLinks.defaultWarehouse.linkText}}Pending Approvals:
{{vm.headerLinks.pendingApproval.linkText.split(" ")[0]}}Open Orders:
{{vm.headerLinks.openOrders.linkText.split(" ")[0]}}Product Lists:
{{vm.headerLinks.productList.linkText.split(" ")[0]}}
- Color: Gray
- Connection Size 1: 3
- Connection Size 2: 3
- Connection Type: MNPT|MNPT, Standard
- Connection Type 1: MNPT
- Connection Type 2: MNPT
- Fitting Type: Nipple
- Length: 3, 3 in
- Manufacturer: Xirtec®
- Material: PVC
- Material Construction: PVC
- Schedule Rating: SCH 80
- Temperature Rating: 140, 140 deg F
- Inside Diameter: 2.86 in
- Item Name: Pipe Nipple
- Material Standard: ASTM D1785
- Outside Diameter: 3-1/2 in
- Schedule: SCH 80
- Nominal Size: 3 in
3x3 S-80 PVC NIPPLE
- Features
- In addition to a lower material cost, Xirtec® PVC pipe can significantly reduce labor and transportation costs on a typical installation, the reason they are lightweight, easily handled, stored, cut and joined
- Xirtec® PVC provide years of maintenance-free service, our materials will not rust, pit, scale or corrode on either interior or exterior surfaces, thermoplastic piping systems in a variety of demanding industrial applications have operated successfully for over 45 years
- Xirtec® PVC are immune to damage from naturally corrosive soil conditions as well as electrochemical and galvanic corrosion, this is particularly advantageous in underground installations where galvanic reaction often causes damage to metal piping products
- The IPEX® vinyl systems, including pipe, valves and fittings, provide outstanding resistance to a wide range of chemicals such as most acids, alcohols, alkalis, salt solutions, halogens and more
- Xirtec® has a substantially lower roughness factor than metal and other materials and since it does not rust, pit, scale or corrode, the interior walls remain smooth in virtually any service
- Xirtec® PVC suitable for use with potable water as listed with the national sanitation foundation (NSF) and csa international
- IPEX® vinyl systems are designed to meet a broad range of service temperatures, Xirtec® PVC has a recommended maximum service temperature of 140 deg F under pressure
- With a low thermal conductivity factor, IPEX® vinyl systems have less heat loss or gain, thus sustaining service temperature more efficiently than metal piping, as a result, pipe insulation needs may be reduced
- With energy conservation a prime concern, you can rely on the fact that IPEX® manufacturing process for Xirtec® piping material requires less than half the energy needed to produce the equivalent size of carbon steel or steel alloy materials
- STANDARD_APPROVALS: ASTM D1785/D2464|CSA B137.3|NSF 14/61
- APPLICATION: For plant chemical distribution lines, water and wastewater treatment, acid systems for refineries, pickling lines and plating shops, chlorine injection, chlorine dioxide and chloralkali plant piping, steel wire plants, battery manufacturing, bleach lines in textile and paper mills, alum and caustic handling systems, circuit board manufacturing, semiconductor, pharmaceutical, cooling water and cooling tower systems, tailing and slurry lines, washwater recovery systems, plant water supply, brine and seawater systems, fish farming, waterworks, aquariums and swimming pools, irrigation systems in golf courses and greenhouses applications