Model REC3-900 suspended personnel platform, designed and built in full compliance with OSHA 29 CFR Part 1926.1431 Hoisting Personnel, and equipped with access gate SPECIFICATIONS OF LTI'S TURN-KEY PACKAGE � LTI's original detachable test weight system evenly distributes 125% test load (1125 lbs.) on platform frame and floor by means of easy-on/easy-off pins � Platform built of 0.120" wall, 1.50" O.D. square tubular steel, with all edges smoothed � Maximum rated load capacity: 900 lbs. � Approximate platform only weight: 570 lbs � Platform dimensions: 36" O.D. width X 84" O.D. length X 42? I.D. height � Guardrail system at 42? height complies with OSHA 29 CFR Part 1926.502, Subpart M � Inner grab rail installed inside entire perimeter of platform � Inner grab rail provides fall arrest anchorage that complies with OSHA 29 CFR Part 1926.502, Subpart M � Sides enclosed from toeboard to mid rail � Four-leg sling assembly (dedicated for personnel hoisting only), of �" 6 X 36 IWRC wire rope, secured to a master link and attached at top of platform with swage sockets and clevis pins. Cable protected by nylon cover � Sling assembly includes a fifth leg for tie-off to loadline above overhaul ball � Access gate with grease zerks, opens inward only, with positive restraining device � Floor built of 19-W-4 bar grating � Corrosion-resistant data plates stating weight of platform and its rated capacity � Platform and suspension system designed by a qualified person competent in structural design � AWS certified welding procedures � Electrostatic powder coat finish in solid red (test weight and pins in safety yellow) that provides high resistance to impact, abrasion, chemicals and corrosion LTI'S VALUE-ADDED FEATURES � Certification of OSHA Compliance � Three-year unconditional Warranty � Use and Safety Handbook stored in document holder on platform � 13-minute training DVD explains OSHA compliance